Monday, October 28, 2013

Spare Tire Mount

While I was washing and waxing the trailer last week I noticed that the spare tire has been digging into the gel coat.  I once toyed with putting the spare under the trailer but didn't like the resulting ground clearance. I've thought about moving the mount from the body to the bumper or to the front of the trailer using a receiver like Kamper Bob built for his generator, but so far I'm too lazy for those solutions.

The short term solution has been to install something for the tire to rub on other than the gel coat. I thought a leather ring would work well but I didn't have a big chunk of leather.  I did, however, have a big chunk of thin neoprene from my boat building supplies.

I cut out a big donut, added some piece of old double faced tape

and stuck it in place. I used the old double faced tape because I expected it to stick well enough to hold the neoprene in place until the spare tire was mounted, but wouldn't stick so much that removing it later would be too big a chore.

With the spare back in place, the neoprene ring is squeezed between the tire and the gel coat. We'll see how well it works. I may still be shopping for some leather one of these days or plugging in the welder for its annual exercise.

4 comments:

  1. Ugh! Ours didn't dig into the gelcoat, but it left a nasty brown ring that won't scrub off. So then I put a piece of thin white styrofoam behind it -- and it stained the gelcoat blue!

    I finally got some of those fat stick-on felt pads and stuck several on the tire. I hope it works.

    I'd love to hear how your neoprene works out long term. I have some in the shed.

    ReplyDelete
    Replies
    1. Have you tried Bar Keeper's Friend to clean the stains from the gel coat? I'll be interested to hear how the felt pads work - they sound like a solution with good potential. I'll keep you posted on how the neoprene works once we get a chance to put some more miles on the trailer.

      Delete
    2. I bought Bar Keeper's Friend this past spring, but am embarrassed to admit I haven't used it yet! :)

      Delete
    3. It works pretty good. Rinse well and finish off with some polyglow or floor polish to restore the shine.

      Delete